BCDS100-20-40 Battery Capacity Tester for Lithium Battery Charge and Discharge Cycler
1. Instrument Model Description
The battery capacity tester which supports a maximum charge and discharge voltage of 100V , a maximum charging current of 20A , and a maximum discharge current of 40A.
2. Equipment Introduction
Battery aging cabinet is mainly used for charge and discharge cycle test of finished lithium battery.
Test items include: battery charging protection voltage , discharge protection voltage, capacity , etc ; the equipment has four test steps , charging discharge, sheland cycle .
By editing the corresponding steps, the battery can be tested according to the set process.
3. Equipment Parameter Description
| Product model |
BCDS100-20-40 |
| Voltage |
measuring range |
10 ~ 100V |
| |
precision |
± ( 0.2% of reading + 0.2% of range) |
| Current |
Charging range |
200~ 20000mA |
| |
Discharge range |
200 ~ 40000mA |
| |
precision |
±(0.2% of reading + 0.2% of range ) |
| Battery charging |
Constant pressure cut - off current |
Minimum 50 mA |
| Volume |
precision |
±1‰ |
| Power |
Discharge power |
≤ 4000W |
| Time |
Inspection time |
Receive real - time < 2S |
| |
Timed range |
0~999 Hours / Step |
| Data recording interval |
≥5S |
| Medium machine version |
1.1 Series |
| Battery Charging |
Charging mode |
Constant current constant pressure charging |
| |
cut - off condition |
Voltage , current , relative time , overcharge protection |
| Discharge |
Discharge mode |
constant - current discharge |
| |
cut - off condition |
Voltage , relative time , and overdischarge protection |
| Circulate |
Cycle measurement range |
1 ~ 999 Times |
| |
Number of single cycle steps |
100 |
| Voltage and current detection and sampling |
Four - line sampling |
| Data base |
The SQL database was used to manage the test data |
| Upper - computer communication mode |
Based on TCP / IP protocol network port , serial port |
| Data output mode |
EXCEL , TXT , Chart files |
4. FAQ
1) How long Is The Warranty ?
We are very confident in our products and we package them very well so usually you receive intact equipment Any quality issues , which we will deal with immediately . If the equipment parts are damaged , the equipment warranty period is 1 year (12 months ) for 1 year due to non - human factors , and we will provide the replacement parts at cost.
2) How to order ?
Please send us your purchase order by email or call us salesor we can make the proforma invoice under your request.
We need to know the following information for your order before sending your PI.
Product Tags:
|
|
BCDS100-20-40 Battery Capacity Tester for Lithium Battery Charge and Discharge Cycler Images
|
